2002 Mazda MX-5 Miata Remote Programming Instructions
Written by Miguel Pilares
Updated at May 13th, 2024
- Key Cutting Equipment
- Universal EZ Installer
- On Board Programming
- Pairing Equipment
- Simple Keys
- Support Documentation
- Universal Remotes
- Vehicle Information
- NASTF Resources
- FAQs
- Latest Updates
- OEM Programmers
- CKE Programmer Manuals (dongles)
- ROKS Box Information
- Programming Advice
- General Key Information
- Open the driver's door and leave it open.
- Lock and Unlock the driver's door using the power door switch on the door.
- Insert the key into the ignition.
- Turn key to ON then OFF position. Do this 3 times in 10 seconds. Leave the key in the ignition in the LOCK (off) position.
- Close and open the driver's door 3 times leaving the door open.
- Vehicle will respond by locking and unlocking door locks once.
- Press any button on the remote two times. Vehicle will respond by locking and unlocking door locks once.
- For additional remotes repeat step 7 now for up to 3 remotes total.
- Remove the key from the ignition and the vehicle will respond by cycling locks automatically. Get out of the car with keys and test remote(s).