2004 Audi A4 Remote Programming Instructions
Written by Cole Fuquay
Updated at June 25th, 2024
- Key Cutting Equipment
- Universal EZ Installer
- On Board Programming
- Pairing Equipment
- Simple Keys
- Support Documentation
- Universal Remotes
- Vehicle Information
- NASTF Resources
- FAQs
- Latest Updates
- OEM Programmers
- CKE Programmer Manuals (dongles)
- ROKS Box Information
- Programming Advice
- General Key Information
- Insert key into ignition (not valet key).
- Turn key to "on" position, but do not start engine.
- Roll down front window on driver's side.
- Insert second key into door.
- Turn clockwise to lock all doors, then hold the key in that position.
- Press "unlock" on the first fob to be programed. Hold for 2 seconds, and the vehicle lights will flash once.
- Wait 2 seconds, then press "unlock" on the fob again, the vehicle lights will flash to confirm.
- Unlock door with key (fob will not work yet).
- Remove key from ignition.
- Close door and test fob.
- Repeat steps 6-7 for additional fobs to be programed, holding the key that was inserted into the door in the lock position.