2008 Mazda MX-5 Miata Remote Programming Instructions
Written by Cole Fuquay
Updated at June 26th, 2024
- Key Cutting Equipment
- Universal EZ Installer
- On Board Programming
- Pairing Equipment
- Simple Keys
- Support Documentation
- Universal Remotes
- Vehicle Information
- NASTF Resources
- FAQs
- Latest Updates
- OEM Programmers
- CKE Programmer Manuals (dongles)
- ROKS Box Information
- Programming Advice
- General Key Information
Table of Contents
NOTE: Instructions for Vehicles without Smart Entry System
- Remove key from ignition Close all doors
- Open the driver's door
- Perform following steps within 24 seconds. Turn ignition switch ON and back to LOCK position three times
- Close and open driver's door three times
- Door locks should lock and unlock automatically, if they do not wait 40 seconds and repeat procedure starting at step 1
- Press the UNLOCK button, on each keyless remote to be programmed, twice. The door locks should lock and unlock after each remote is programmed. Exit vehicle and test remote(s). NOTE: If the door locks do not lock and unlock
- Close and open the driver's door once, the door should lock and unlock twice
- If door locks do not lock and unlock at this point, start the procedure over with step 3