PLEASE NOTE: You must select the correct clone chip for this function to proceed properly!

Step 1a: IF AT THE CAR, Connect the SmartBox tablet the the SmartBox Programmer by Micro USB. 

Connect the OBD cable to SmartBox Programmer.

Step 2a: IF AT THE CAR, Most vehicles use a standardOBD2 connection which can be found generally underneath the driver side dash and looks something like this image.

Step 1b: IF IN THE SHOP, Connect SmartBox tablet the the SmartBox Programmer by Micro USB. Connect the SmartBox Programmer to a wall outlet   through the “Power” port by Old Style Micro USB. 

Step 2b: IF IN THE SHOP, Now, plug your SmartBox into a power source to power up.

Step 3: Loginto your account.

 Step 5: Press the “Chip Clone” Button on the left side.

 Step 6: Insert a transponder key with chip OR just a chip into the chip reading area (otherwise known as the coil.

 Step 7: Press the “Read Chip” button and the chip information will display on the screen.

  Step 8: Once the chip has been read, now you can clone it by pressing the “Copy” button.

 Step 9: Leave the customers’ existing key in the chip read area and press the Continue button.

Step 10: Place the NEW duplicated key into the chip read are and press the “Continue” button. Once complete try to start the vehicle with the next

PLEASE NOTE: You must select the correct clone chip for this function to proceed properly.