2000 Acura TL Remote Programming Instructions
Written by Cole Fuquay
Updated at June 26th, 2024
- Key Cutting Equipment
- Universal EZ Installer
- On Board Programming
- Pairing Equipment
- Simple Keys
- Support Documentation
- Universal Remotes
- Vehicle Information
- NASTF Resources
- FAQs
- Latest Updates
- OEM Programmers
- CKE Programmer Manuals (dongles)
- ROKS Box Information
- Programming Advice
- General Key Information
NOTE: Entering the programming mode cancels all programmed keyless entry remotes, so none of the previously programmed remotes will work. You must reprogram all of the keyless remotes once you are in the programming mode. You must complete each step within 5 seconds of the previous step to keep the system from exiting the programming mode.
- Turn ignition switch to on (II)
- Press the lock or unlock button on one of the remotes. (An unprogrammed remote can be used for this step.)
- Turn ignition switch to lock (0)
- Repeat steps 1, 2 and 3 two more times using the same keyless remote used in step 2
- Turn the ignition switch to on (II)
- Press the lock or unlock button on the same remote. Make sure the power door locks cycle to confirm you are in programming mode.
- Press the lock or unlock button on each remote you want to program. Make sure door locks cycle after you push each remote button to confirm the system has accepted the remote.
- Turn the ignition switch to lock (0) to exit programming mode.
- Test remote(s).