2004 Mazda MAZDA6 Remote Programming Instructions
Written by Cole Fuquay
Updated at June 24th, 2024
- Key Cutting Equipment
- Universal EZ Installer
- On Board Programming
- Pairing Equipment
- Simple Keys
- Support Documentation
- Universal Remotes
- Vehicle Information
- NASTF Resources
- FAQs
- Latest Updates
- OEM Programmers
- CKE Programmer Manuals (dongles)
- ROKS Box Information
- Programming Advice
- General Key Information
- Open the driver's door and leave it open.
- Lock and Unlock the driver's door using the power lock switch on the door panel.
- Insert the key into the ignition.
- Turn the key to the ON and OFF position three times in 10 seconds. Leave the key in the ignition.
- Open and close the driver's door three times ending with the door in the open position.
- Door locks should respond by locking and unlocking.
- Press any button on the remote two times. Doors should then lock and unlock.
- If Programming a second remote press any button on it two times and door locks should lock and unlock.
- Remove the key from the ignition and locks should lock and unlock again.
- Test Remotes